Bow Rider Models
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
The bow lounge area quickly converts to a functional forward casting platform, with five fully-carpeted and removable boards. Storage for all sorts of gear is available in the cavernous areas under the casting platform.
REF: BRCASTPLAT
Side pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKT
Full-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCY
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARD
The heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
The 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615
A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
/615BR-bb_BW.jpg?width=381&height=244&name=615BR-bb_BW.jpg)
/615BR-bb_BG.jpg?width=381&height=244&name=615BR-bb_BG.jpg)
/615BR-bb_EB.jpg?width=381&height=244&name=615BR-bb_EB.jpg)
/615BR-bb_IO.jpg?width=381&height=244&name=615BR-bb_IO.jpg)
/615BR-bb_NB.jpg?width=381&height=244&name=615BR-bb_NB.jpg)
/615BR-bb_VG.jpg?width=381&height=244&name=615BR-bb_VG.jpg)
/615BR-bb_SB.jpg?width=381&height=244&name=615BR-bb_SB.jpg)
/615BR-bb_SG.jpg?width=381&height=244&name=615BR-bb_SG.jpg)
The spacious lounge in the bow offers comfortable seating for several people. Each full set of cushions includes console backrest cushions and side/front cushions. The trim colour is matched to the selected hull colour.
Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.
This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICER
The bow lounge area quickly converts to a functional forward casting platform, with five fully-carpeted and removable boards. Storage for all sorts of gear is available in the cavernous areas under the casting platform.
REF: BRCASTPLATSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
/670BR-bb_BW.jpg?width=381&height=244&name=670BR-bb_BW.jpg)
/670BR-bb_BG.jpg?width=381&height=244&name=670BR-bb_BG.jpg)
/670BR-bb_EB.jpg?width=381&height=244&name=670BR-bb_EB.jpg)
/670BR-bb_IO.jpg?width=381&height=244&name=670BR-bb_IO.jpg)
/670BR-bb_SB.jpg?width=381&height=244&name=670BR-bb_SB.jpg)
/670BR-bb_SG.jpg?width=381&height=244&name=670BR-bb_SG.jpg)
/670BR-bb_NB.jpg?width=381&height=244&name=670BR-bb_NB.jpg)
/670BR-bb_VG.jpg?width=381&height=244&name=670BR-bb_VG.jpg)
The spacious lounge in the bow offers comfortable seating for several people. Each full set of cushions includes console backrest cushions and side/front cushions. The trim colour is matched to the selected hull colour.
Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.
This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Cuddy Cabin Models
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Ergonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.
REF: DASHC
The folding safety glass windscreen conveniently reduces the boat's overall on-trailer height for easy storage in low garages and carports, as well as creates a more aerodynamic profile when towing on the road.
REF: WINDSCREENFOLD535
Side pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 115L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK535
A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
A full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB535SET
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REF: SNAXTRAILER
Sturdy and stylish, the targa rocket launcher can also flip back into the boat for easy storage. Use with or without the optional bimini.
This tough canvas bimini top complements the targa rocket launcher. Removable when not required, it can also accommodate a set of optional clears.
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
STANDARD
Quality marine battery for confident engine starting and running onboard electronics. Housed in a weather-resistant battery box and secured in the purpose-built battery shelf in the transom.
If you're running an anchor winch or electric motor, you may like to consider upgrading to a dual-battery system in your boat. Complete with a battery isolation switch, the system provides peace of mind if you want more onboard power.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Folding hard top with clears for added weather protection. The folding gas-strut roof and windscreen reduces the boat's on-trailer height by up to a metre for easy storage in standard garages and carports.
REF: ROOFFOLD575
Together with the folding roof, the folding safety glass windscreen conveniently reduces the boat's overall on-trailer height by up to a metre for easy storage in low garages and carports.
REF: WINDSCREENFOLDErgonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.
REF: DASHC
Sturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETL575Side pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
Two comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOXSIDETACKLEBOLSTThe 160L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK575A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
A full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB575SETCustom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REF: SNAXTRAILER
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
The strongest folding hard top in the industry, complete with LED cabin lighting, rock-solid grab rails, plus front and extended side clears for maximum weather protection. The folding roof reduces the boat's on-trailer height for easy storage.
REF: ROOFFOLDTogether with the folding roof, the folding safety glass windscreen conveniently reduces the boat's overall on-trailer height by up to a metre for easy storage in low garages and carports.
REF: WINDSCREENFOLDErgonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.
REF: DASHC
Sturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOXSIDETACKLEBOLSTThe 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB615SET
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERThe strongest folding hard top in the industry, complete with LED cabin lighting, rock-solid grab rails, plus front and extended side clears for maximum weather protection. The folding roof reduces the boat's on-trailer height for easy storage.
REF: ROOFFOLDTogether with the folding roof, the folding safety glass windscreen conveniently reduces the boat's overall on-trailer height by up to a metre for easy storage in low garages and carports.
REF: WINDSCREENFOLDErgonomically-designed dash capable of flush mounting mid-sized MFDs, digital gauges and other controls. Side-mount throttle control is located to starboard.
REF: DASHCSturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOX670730TACKLEBOLSTThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB670SET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
STANDARD
Two comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
Comfortable bolster seat mounted on top of sturdy king/queen seat box with lockable storage. Front of bolster seat flips-up to create a secure standing position for driving. Rear of seat box will accommodate optional Engel fridge.
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Hard Top Models
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Stylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOP
Ergonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHT
Sturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHT
The opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOXSIDETACKLEBOLSTThe 160L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK575A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Flush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGEA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB535SETCustom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REF: SNAXTRAILER
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2Stylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOXSIDETACKLEBOLSTThe 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGEA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB615SET
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERStylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHT
Sturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCY
The heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOX670730TACKLEBOLSTThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGEA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB670SET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
STANDARD
Two comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
Comfortable bolster seat mounted on top of sturdy king/queen seat box with lockable storage. Front of bolster seat flips-up to create a secure standing position for driving. Rear of seat box will accommodate optional Engel fridge.
The 32L Engel fridge is a good option for extended trips to keep food and drinks cold. The 12V-powered unit is fitted on a slide-out system for easy access. (Engel fridge available only with king/queen seat box.)
Two-piece bunk in-fill creates a full double V-berth for comfortable overnighter trips or a safe area for kids to play. Easily stows away under the side bunk cushions when not required.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERStylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
Two comfortable bolster seats are mounted on top of sturdy king/queen seat boxes with lockable storage. Front of each bolster seat flips-up to create a secure standing position for driving. Rear of seat box will accommodate optional Engel fridge.
REF: SEBOXKQBOLSTThe 420L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK730A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGE
A full set of forward bunks with in-fills hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions.
REF: SEFB730SET
/780HTP-bb_BG.jpg?width=381&height=244&name=780HTP-bb_BG.jpg)
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
STANDARD
Two comfortable bolster seats are mounted on top of sturdy king/queen seat boxes with lockable storage. Front of each bolster seat flips-up to create a secure standing position for driving. Rear of seat box will accommodate optional Engel fridge.
Two comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
The 32L Engel fridge is a good option for extended trips to keep food and drinks cold. The 12V-powered unit is fitted on a slide-out system for easy access. (Engel fridge available only with king/queen seat box.)
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
Roller door lockable cabin provides peace-of-mind security to lock tackle and other gear in the boat. Also ensures privacy if spending a night on the water. Lockable roller door is available in anodised silver or gloss black.
An electric macerator toilet can be a welcome feature onboard any boat during extended offshore fishing trips.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERStylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
The 450L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK780A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGE
A full set of forward bunks with in-fills hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions.
REF: SEFB780HTSET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
The 32L Engel fridge is a good option for extended trips to keep food and drinks cold. The 12V-powered unit is fitted on a slide-out system for easy access. (Engel fridge available only with king/queen seat box.)
STANDARD
Two comfortable pilot seats are mounted on top of sturdy king/queen seat boxes with lockable storage. Front of each pilot seat flips-up to create a secure standing position for driving. Rear of seat box will accommodate optional Engel fridge.
Two comfortable side-mount bolster seats with easily-accessible tackle storage and 90L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
Roller door lockable cabin provides peace-of-mind security to lock tackle and other gear in the boat. Also ensures privacy if spending a night on the water. Lockable roller door is available in anodised silver or gloss black.
An electric macerator toilet can be a welcome feature onboard any boat during extended offshore fishing trips.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
Hard Top Pilothouse Models
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERStylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOP
The fully-enclosed and lockable pilothouse of the HTP series offers superior protection from the elements, with its hinged aluminium doors, slide-open windows and fully-lined cabin. Its perfect for extended offshore adventures.
REF: PILOTHOUSEErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 420L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK730A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGEA full set of forward bunks with in-fills hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions.
REF: SEFB730SET/780HTP-bb_BW.jpg?width=381&height=244&name=780HTP-bb_BW.jpg)
/780HTP-bb_EB.jpg?width=381&height=244&name=780HTP-bb_EB.jpg)
/780HTP-bb_IO.jpg?width=381&height=244&name=780HTP-bb_IO.jpg)
/780HTP-bb_NB.jpg?width=381&height=244&name=780HTP-bb_NB.jpg)
/780HTP-bb_VG.jpg?width=381&height=244&name=780HTP-bb_VG.jpg)
/780HTP-bb_SB.jpg?width=381&height=244&name=780HTP-bb_SB.jpg)
/780HTP-bb_SG.jpg?width=381&height=244&name=780HTP-bb_SG.jpg)
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
An electric macerator toilet can be a welcome feature onboard any boat during extended offshore fishing trips.
Additional seat located outside the pilothouse, with built-in freshwater sink under the seat cushion. The seat box also houses tackle storage and a leader dispenser.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2Stylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPThe fully-enclosed and lockable pilothouse of the HTP series offers superior protection from the elements, with its hinged aluminium doors, slide-open windows and fully-lined cabin. Its perfect for extended offshore adventures.
REF: PILOTHOUSEErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
The 450L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK780
A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGE
A full set of forward bunks hides the spacious storage areas and optional toilet beneath. Covered in high-quality fabric, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB780HTSETFABRIC
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Twin high-quality LED spotlights provide plenty of light at night.
High-quality LED light bar provides plenty of light at night.
The opening centre front window is useful for frosty mornings at the boat ramp and hot days on the water to allow good air flow into the hard top cabin.
The windscreen wiper and washer (with freshwater reservoir) is a handy feature on a hard top boat, especially in rough and windy conditions.
An electric macerator toilet can be a welcome feature onboard any boat during extended offshore fishing trips.
Additional seat located outside the pilothouse, with built-in freshwater sink under the seat cushion. The seat box also houses tackle storage and a leader dispenser.
STANDARD
A full set of forward bunks with in-fills hides spacious storage areas and optional toilet beneath. Covered in high-quality fabric, these comfortable bunks fit neatly into position to ensure they stay in place.
A full set of forward bunks with in-fills hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
CENTRE CONSOLE MODELS
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Positioned to create a full 360º fishing platform, the spacious centre console features integrated grab rails, drink holders, and allows flush-mount installation of large-screen marine electronics and other controls.
REF: CONSOLEXS
Large and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXS
Covered in durable deck grip, the casting platform provides an elevated position to fish. Beneath the platform's lockable hatch is a cavernous storage area to house an additional battery (for bow-mount electric motor) and other gear.
REF: CASTPLAT505535575
Integrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXSSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
Quality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 115L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK535A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETCustom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REF: SNAXTRAILER
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
STANDARD
Quality marine battery for confident engine starting and running onboard electronics. Housed in a weather-resistant battery box and secured in the purpose-built battery shelf in the transom.
If you're running an anchor winch or electric motor, you may like to consider upgrading to a dual-battery system in your boat. Complete with a battery isolation switch, the system provides peace of mind if you want more onboard power.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2Positioned to create a full 360º fishing platform, the spacious centre console features integrated grab rails, drink holders, and allows flush-mount installation of large-screen marine electronics and other controls.
REF: CONSOLEXSLarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXSCovered in durable deck grip, the casting platform provides an elevated position to fish. Beneath the platform's lockable hatch is a cavernous storage area to house an additional battery (for bow-mount electric motor) and other gear.
REF: CASTPLAT505535575Integrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXSSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKT
Full-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERQuality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 160L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK575A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETCustom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REF: SNAXTRAILER
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2Positioned to create a full 360º fishing platform, the spacious centre console features integrated grab rails, drink holders, and allows flush-mount installation of large-screen marine electronics and other controls.
REF: CONSOLEXSLarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXS
Covered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780Integrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXS
The lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERQuality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615XSWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET/615XS-bb_BW.jpg?width=381&height=244&name=615XS-bb_BW.jpg)
/615XS-bb_SB.jpg?width=381&height=244&name=615XS-bb_SB.jpg)
/615XS-bb_SG.jpg?width=381&height=244&name=615XS-bb_SG.jpg)
/615XS-bb_VG.jpg?width=381&height=244&name=615XS-bb_VG.jpg)
/615XS-bb_EB.jpg?width=381&height=244&name=615XS-bb_EB.jpg)
/615XS-bb_BG.jpg?width=381&height=244&name=615XS-bb_BG.jpg)
/615XS-bb_NB.jpg?width=381&height=244&name=615XS-bb_NB.jpg)
/615XS-bb_IO.jpg?width=381&height=244&name=615XS-bb_IO.jpg)
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERPositioned to create a full 360º fishing platform, the spacious centre console features integrated grab rails, drink holders, and allows flush-mount installation of large-screen marine electronics and other controls.
REF: CONSOLEXSLarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXSCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780Integrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXSThe lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERQuality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670XSXTWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
REAR CENTRE CONSOLE MODELS
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Large and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXS
Covered with durable deck grip, the elevated casting platform is easily accessed via a step in each corner of the deck. Heavy duty seat spigots in the casting platform also accommodate re-positionable seating.
REF: CASTPLATXSRIntegrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXS
The massive storage area is accessed via a dual-lock hatch with gas struts. Remove the drop-in front section to slide in an icebox/fridge, swag and camping gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORXSRSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDER
The 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615XSWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERLarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days. Drink holders located on the front of console.
REF: WINDSCREENXSCovered with durable deck grip, the elevated casting platform is easily accessed via a step in each corner of the deck. Heavy duty seat spigots in the casting platform also accommodate re-positionable seating.
REF: CASTPLATXSRIntegrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORXSThe massive storage area is accessed via a dual-lock hatch with gas struts. Remove the drop-in front section to slide in an icebox/fridge, swag and camping gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORXSRSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670XSXTWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
OPEN HARD TOP MODELS
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICER
The spacious centre console, with integrated side grab rails, allows flush-mount installation of large-screen marine electronics and all other controls.
REF: XTCONSOLE
Large and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days.
REF: WINDSCREENXT
Sturdy rocket launcher designed for the open hard top of Bar Crusher’s XT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLXTCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780
The lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670XSXTWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERThe spacious centre console, with integrated side grab rails, allows flush-mount installation of large-screen marine electronics and all other controls.
REF: XTCONSOLELarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days.
REF: WINDSCREENXTSturdy rocket launcher designed for the open hard top of Bar Crusher’s XT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLXTCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780The lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 420L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK730A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERThe spacious centre console, with integrated side grab rails, allows flush-mount installation of large-screen marine electronics and all other controls.
REF: XTCONSOLELarge and tough acrylic windscreen provides protection for marine electronics, controls and other switches at the helm. Tinted to reduce glare on bright and sunny days.
REF: WINDSCREENXTSturdy rocket launcher designed for the open hard top of Bar Crusher’s XT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLXTCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780The lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERThe 450L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK780A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
Dual outboard installation up to the recommended maximum horsepower for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
WALK AROUND MODELS
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2
Super-strong frame T-top for protection over the console. The T-top folds/pivots back into the boat when travelling long distances on the road or for easy storage of the boat in a standard garage or under a car port at home.
REF: ROOFTTOP575615670WRSturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780The lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERQuality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615XSWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
The Stressfree NG Mini 50 (freefall) anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. The freefall function is very handy in deep water. Quick and easy.
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Mini 50 anchor winch has a 500W motor, which delivers a retrieval rate of around 52m per minute. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 6mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
A scaled-down version of the premium baitstation with drawers fitted to larger models, the mini deluxe two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
FishMat™ flooring is a convenient way to cover the checkerplate deck of your boat, while maintaining the low-maintenance benefits of every Bar Crusher. Anti-fatigue and non-slip, the deck can be hosed out in minutes.
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
Bar Crusher's well-proven Waveslicer® hull incorporates a smooth, deep-V design that slices beautifully through waves without pounding. The hull delivers exceptional performance in all directions and conditions.
REF: WAVESLICERSuper-strong frame T-top for protection over the console. The T-top folds/pivots back into the boat when travelling long distances on the road or for easy storage of the boat in a standard garage or under a car port at home.
REF: ROOFTTOP575615670WRSturdy rocket launcher designed for the folding hard top. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLCovered with durable deck grip, the heavy duty casting platform provides an elevated position to fish, yet still offers enough freeboard to feel safe in average conditions. Seat spigots in the casting platform also accommodate a re-positionable lean seat.
REF: CASTPLAT615780
Integrated footrest, for a comfortable seated driving positing, and plenty of storage space beneath the console to stow tackle bags, jackets and other gear. Keep it out of the way so the deck is clear.
REF: CONSOLESTORWRThe lockable hatch in the forward casting platform reveals a cavernous storage area to house additional batteries (for the bow-mount electric motor) and other gear. Drainage channels ensure everything stays dry.
REF: CASTPLATSTORSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERQuality icebox with comfortable cushion-top seating. The 70L icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
REF: SEATICEBOXThe 230L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK670XSXTWRA 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLET
Give your arms a rest and fit an anchor winch in your boat. The Stressfree Midi 50 anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. Quick and easy.
The Stressfree NG Mini 50 (freefall) anchor winch has a 1400W motor, which delivers a retrieval rate of around 74m per minute. The freefall function is very handy in deep water. Quick and easy.
This rope/chain kit is designed to suit Stressfree anchor winches. Kit includes approximately 100m of 8mm double braid and chain, and is spliced and spooled onto the drum for your convenience.
A bracket designed for a bow-mount electric motor is welded to the bow. Strong and sturdy, it accommodates different brands of electric motors.
Designed with an electric actuator for positive closure, the Bar Flap® system is operated from a switch at the helm. This feature is useful for shallow draft applications or when running lightly loaded in heavy seas.
The saltwater deck wash system includes a 5.2gpm pump, heavy duty coiled hose and quality spray attachment. It's a great system for washing away mess while you're on the water.
The re-positionable rod rack clips directly to the side pocket. Each clip-on rod rack allows vertical storage for up to four fishing rods. Use or remove them from your boat as required.
STANDARD
Sturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
STANDARD
This premium two-drawer baitstation is permanently fixed to the transom. Rod holders, drink holders, two large drawers (lined with deck grip) and secured with bungy cord on each side. Durable cutting board can be removed for cleaning, and also replaced when worn.
Interchangeable with a removable baitboard, the ski pole (105kg load rating) is suitable for towing a skier or wakeboarder. (Ski pole option is for boats with removable baitboard, as baitstations are permanently fixed to the transom.)
STANDARD
Quality icebox with comfortable cushion-top seating. The icebox can be securely fastened to the checkerplate deck while underway, yet can be easily removed in seconds. Use it as an icebox (in its true sense) or as additional dry storage. Cushions can be removed for cleaning.
This welded-in, padded bench seat with drawer storage has a flip-flop back rest. A pin system locks the back rest into place, which allows it to be used while driving and also at anchor while fishing out the back.
Carpeted rod locker (inside and out) to keep your gear safe.
Mid-range recommended outboard engine for this boat.
Maximum recommended outboard engine for this boat.
Minimum recommended outboard engine for this boat.
STANDARD
Custom-designed for the hull, the factory-packaged galvanised steel trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
UPGRADE
Custom-designed for the hull, the factory-packaged alloy dual-axle trailer ensures the boat self-levels and aligns perfectly every time. Fitted as standard with Bar Crusher’s innovative Bar Catch® launch/retrieve system.
The stainless steel framed stone guard kit is ideal for protecting the boat while towing. A zippered section on each side also provides easy access to the hull when washing the boat.
SPECIAL EDITION MODELS
Building on the success of Bar Crusher's Waveslicer® deep-V, non-pounding hull, the innovative Gen2® hull design with Delta Flare® delivers significant benefit in the 490 to 615 hull series for better all-round performance.
REF: WAVESLICERGEN2Stylish and functional hard top with full-height and tinted safety glass windscreen providing an unobstructed 360-degree view. Nothing beats a hard top for protection from the elements, especially in big seas chasing big fish!
REF: HARDTOPErgonomically-designed, anti-glare dash capable of flush mounting multiple large-screen MFDs, digital gauges and other controls. A small, carpeted shelf behind the wheel is ideal for storing mobile phones, lures and other small items.
REF: DASHHTSturdy rocket launcher built into the hard top of Bar Crusher's HT models. The rod holders can accept rods with gimbal fittings, and each is spaced far enough apart to prevent gear banging together while underway.
REF: ROCKETLHTThe opening forward hatch allows access easy to the bow. The tinted hatch also provides filtered light into the cabin, and good ventilation if spending the night onboard. Sealed and weather-proof, it opens on durable struts.
REF: HATCHTINTEDSide pocket storage running the full length of the cockpit on both sides of the boat. Ideal for bait rods, tagpoles, gaffs, nets, fenders and other gear. High-grade marine carpet along the bottom of each pocket to prevent gear banging around when underway.
REF: CPTPKTFull-length air buoyancy chambers even further increase the safety factor of every Bar Crusher boat. Unlike foam (which is known to rot in a boat's hull), the fully welded and sealed deck ensures complete peace of mind on the water.
REF: BUOYANCYSturdy (and removable) baitboard with rod holders and integrated drink holders. The baitboard drains into the berley bucket, while the durable cutting board can be removed for cleaning and also replaced when worn. Baitboard is interchangeable with optional ski pole.
REF: BAITBOARDThe heavy duty boarding ladder allows easy access into and out of the boat, whether on the water or on the trailer. Solid alloy construction, flip-up/flip-down, firmly secured via a mounting bracket welded to the marlin board.
REF: BOARDINGLADDERTwo comfortable side-mount bolster seats with easily-accessible tackle storage and 75L split lid, slide-out iceboxes. Each insulated icebox is ideal for food, drinks, fish, or as additional dry storage or seating. A strap point secures icebox while underway. Icebox can also be slid forward to maximise cockpit space.
REF: SEBOXSIDETACKLEBOLSTThe 200L underfloor fuel tank, combined with the efficiency of modern outboard engines, ensures you will have a serious cruising range when out on the water. Fully welded and sealed, the tank is as durable as every Bar Crusher boat.
REF: FUELTANK615A 12V DC power outlet installed in the dash allows you to run a handheld spotlight, charge your mobile phone or camera, or run other accessories. Controlled via a switch on the dash, so you can leave your accessory plugged in.
REF: 12VOUTLETFlush-mounted 2.3A universal USB charging port for charging phones, action cameras and other devices. The dedicated USB port frees-up the 12V charging port(s) for use with other accessories.
REF: USBCHARGEA full set of forward bunks hides the spacious storage areas beneath. Covered in high-quality marine vinyl, these comfortable bunks fit neatly into position to ensure they stay in place, even during rough conditions on the water.
REF: SEFB615SET
Details of your personalised build spec will be forwarded to the Bar Crusher team for quoting.
You're well on your way to setting-up your Bar Crusher. Enter your details to send us your build spec.
Click here to view our privacy policy.